Start with what the viewer needs
Write a shot as an action you can recognize in the viewfinder. For a short coffee demonstration, “weigh the grounds overhead so the numbers are readable” gives you a useful setup and a frame to check. “Get coffee B-roll” leaves those decisions until you’re holding the camera.
In the example shoot, the finished cup establishes the result, the wide shot explains the workspace, and the overhead and detail shots show the method. The editor can use a wider frame to establish context and a closer frame to make a specific detail legible. Fitchburg State guide to shot composition
Capture by setup
Keep the steps in the order the viewer will see them. Give each shot a setup name based on what you have to move or rebuild. Film the shots tagged “Window · tripod” together, even when they appear in the opening and closing of the edit. Plan the overhead shots around the rig and the position of the work surface. Check whether changes in props, light, or talent availability affect what you can group. American University video production primer
Use the framing and notes fields for things you cannot recover later: readable labels, screen direction, room for subtitles, natural sound, or a second aspect ratio the client needs. Add another row if that deliverable needs a separate take.
Run a wrap check before teardown
Mark a shot captured after you check the actual footage. When you reach the final setup, scan the must-have list and open a few clips at the start and end. Listen for audible dialogue and check that you have room to cut. Record room tone if the edit needs it. A checked row helps you keep track of the shot during the day and gives you a clear list of pickups when time runs short.
Keep a shoot-sheet printout for a location with poor reception. If you plan to use CreatorMan there, open it on the device ahead of time and look for the offline-ready message.
Start a shot list